Varenummer:
1041
LNA-5000 Bredbånds mastforstærker 50 - 5000 MHz 1000 MHz 23/2.0 dB
LNA-5000 High-quality technique in it's most noble form: a modern SiGe-amplifier chip with a low-loss ceramic-microwave substrate and the use of microstrip-N sockets nake possible a low a low noise figure as well as a high amplification over a bandwidth o
Beskrivelse
LNA-5000 Bredbånds mastforstærker 50 - 5000 MHz 1000 MHz 23/2.0 dB
High-quality
technique in it's most noble form: a modern SiGe-amplifier chip with a low-loss
ceramic-microwave substrate and the use of microstrip-N sockets nake possible a
low a low noise figure as well as a high amplification over a bandwidth
of 5 GHz.
The outstanding large signal performance of the LNA 5000 is certified by an IP3 >30 dBm. Intermodulation effects due to high sum signals of bigger antennas are nearly impossible.
Hence the LNA 5000 classifies itself as an Allround-Amplifier for many applications, as a preamplifier for scanners and receivers or for improving sensitivity of measuring equipment systems. But also as a low-power amplifier the LNA 5000 with its linear output power of up to 20 dBm can be very useful. The supply voltage of the amplifier can be feeded directly or remotely via the coaxial cable, the supply voltage will be stabilized internally.
Due to its weatherproof housing the LNA 5000 may be fixed directly at the antenna mast.
The mast clamps are hot-dip galvanized, all screws and nuts are made of stainless steel.
Recommended remote powering coupler: DCC-5000.
The outstanding large signal performance of the LNA 5000 is certified by an IP3 >30 dBm. Intermodulation effects due to high sum signals of bigger antennas are nearly impossible.
Hence the LNA 5000 classifies itself as an Allround-Amplifier for many applications, as a preamplifier for scanners and receivers or for improving sensitivity of measuring equipment systems. But also as a low-power amplifier the LNA 5000 with its linear output power of up to 20 dBm can be very useful. The supply voltage of the amplifier can be feeded directly or remotely via the coaxial cable, the supply voltage will be stabilized internally.
Due to its weatherproof housing the LNA 5000 may be fixed directly at the antenna mast.
The mast clamps are hot-dip galvanized, all screws and nuts are made of stainless steel.
Recommended remote powering coupler: DCC-5000.